Cold Jet AERO 2 PCS 60, Руководство оператора

Страница: 7 / 32

6 7
PCS 60 System Description
The PCS 60 may be supplied with the Performance Kit or the Precision Kit or both depending
on what was ordered. An optional Advanced Applicator is available upon request. The standard
applicator kits are as follows:
Performance Kit
y
3/4 in or 1in Performance Applicator
y
Performance nozzle
y
Nozzle handle
y
1in Air supply hose 25 ft (7.62 meters)
y
3/4 in or 1in Hybrid-Flex blast hose 20 ft (6.09 meters)
y
Hose carrier
y
Hose wrap
Precision Kit
y
1/2 in Precision Applicator
y
2 Precision nozzles
y
1in Air supply hose 25 ft (7.62 meters)
y
1/2 in Hybrid-Flex blast hose 12 ft (3.66 meters)
y
Hose carrier
y
Hose Wrap
WARNING High pressure cleaners shall not be used by children or untrained personnel.
WARNING High pressure hoses, fittings and couplings are important for the safety of the
machine. Use only hoses, fittings and couplings recommended by Cold Jet.
WARNING To ensure machine safety, use only original spare parts from Cold Jet or
approved by Cold Jet.
WARNING The applicator and applicator hose contain electrical connections. Do not
immerse in water.
WARNING Do not use the machine if a supply cord or important parts of the machine are
damaged, e.g. safety devices, high pressure hoses, applicator.
WARNING Inadequate extension cords can be dangerous. If an extension cord is used, it
shall be suitable for the environment in which it is used, if used outdoors the
connection has to be kept dry and off the ground. It is recommended that this
is accomplished by means of a cord reel which keeps the socket at least 2.4
inches (60 mm) above the ground.
WARNING Always switch off the main disconnecting switch, or unplug the blaster power
cord when leaving the machine unattended.