Cold Jet 2A0388, Руководство оператора

Страница: 6 / 28

INTRODUCTION
This manual should be kept with the machine and be readily accessible to machine operators. This manual
contains information on the safety and operation. The graphics used in this manual may show machine
details that may be different than the actual machine. Components of the machine may have been removed
for illustrative purposes or the continuing improvement of the machine’s design may cause changes that are
not included in this publication.
The owner of this machine is responsible for verifying the operator of this machine is properly trained and
understands the contents of this manual
GENERAL INFORMATION
The COMBI PCS 110 DUAL from Cold Jet presents a revolutionary alternative to existing dry ice production
and blasting machines in that it combines dry ice production and dry ice blasting in ONE MACHINE.
The COMBI PCS 110 DUAL provides a non-stop supply of high-density pellets. The source of raw material for
the production of pellets is liquid carbon dioxide conserved at low temperature in a storage tank. The liquid
CO
2
flows into the machine in a regulated manner and is transformed into CO
2
snow which is then pressed
through an extruder plate by means of the horizontal movement of a hydraulically driven piston.
The produced dry ice is then led into the two buffer tanks and blasted when activated by the control
system. The COMBI PCS 110 DUAL has a quick start-up that reduces downtime and loss of valuable CO
2
. This
is secured by a start-up sequence purging the liquid line and using a special valve to fill the chamber. The
machine also uses a heat exchanger for sub-cooling the liquid CO
2
, which enables higher CO
2
utilization and
a better liquid CO
2
ratio.
COMBI PCS 110 DUAL
Operator’s Manual
Version: 1.0
Page: 5 of 28
Date: 10.05.2021