GREAT BRITAIN • CUSTOMER SERVICE
tel. 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Ver
. 20170925
LED Power Supply Adaptor
Art.no 36-5336
Model XH-LED15T
Please read the entire instruction manual before use and save
it for future reference. We reserve the right for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
Warning!
Whenever installing any electrical fittings, basic
safety precautions should always be observed to avoid the risk
of fire, electric shock and personal injury.
Warning!
All light fittings must be installed in accordance
with current safety regulations to prevent life-threatening
accidents. The installation should only be performed by
competent persons with the required knowledge of electrical
wiring. If in doubt, contact a qualified electrician.
• The product is intended for indoor use only.
• The product must not be modified or used for any other
purpose than that for which it has been designed.
• Make sure that the wires do not rub against sharp corners
or edges.
•
This is not a toy!
Do not let children play with the product
or be in its immediate proximity without adult supervision.
• The adaptor may not be used if any part is damaged. If so,
it should either be discarded or repaired by a qualified
technician.
• Do not cover the adaptor with anything that will hinder
proper ventilation, such as foil, paper, plastic, etc.
• The rating label containing the type designation must not
be removed or made illegible.
• The adaptor is designed to supply power to 12 V LED
lighting fixtures at a maximum total load of 15 W.
Wiring instructions
1. Loosen the screws holding the cups over the connections
in place and remove the cups.
Care and maintenance
Wipe the adaptor as required using a soft, dry cloth.
Always unplug the adaptor from the mains socket before cleaning.
Responsible disposal
–
N
+
L
2. Connect the input 230 V AC to the terminal block, attaching
the blue wire to
N
and the black (or brown) wire to
L
on
the block.
3. Connect an output wire to the LED lighting (12 V DC),
attaching the blue wire to
–
and the black (or brown) wire
to
+
on the block.
4. Bend the wires so that they lie in the strain relief on both sides.
5. Screw the cups in place over the connections. Both cups
also serve as strain relief.
Note:
The strain relief is designed
for H03VVH2-F cable.
6. Connect a splitter at a suitable point on the output wire to
the LED light. An example of a parallel connection.
Terminal block for input
230 V AC
Terminal block for 12 V DC
to LED light
This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU. In
order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling
your product, take it to your local collection
facility or contact the place of purchase. They
will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Primary
230 V AC, 50 Hz
Secondary
12 V DC, 1.25 A
Output
15 W for LED light strips, LED spotlights
and other LED lighting
Ta
50 ºC
Tc
75 ºC
• For use with H03VVH2-F cable, 0.5–1.0 mm² wire
• Non-dimmable
