PXIe Platform Optical Switch Module
|
SwitchPXIe
Coherent Solutions Ltd.
Version
2.01
9
Status LED
The Status LEDs are used to denote the operation state of the SwitchPXIe. The different
colours have slightly different meanings for the different SwitchPXIe models.
3.4.1
For SwitchPXIe-1003 and SwitchPXIe-1103
•
Blinking yellow: Indicates initialization on startup.
•
All off- Indicates that the SwitchPXIe is in the
PARK
state (
State 0
).
•
Solid green- Indicates which state the SwitchPXIe is routed to.
•
Solid red- Indicates a Switch error. Most often this means an invalid route position.
3.4.2
For SwitchPXIe-1006/1009/1107
•
Blinking yellow: Indicates initialization on startup.
•
Solid green- Indicates successful initialization and communication.
•
Solid red- Indicates a Switch error. Most likely an initialization error at startup.
3.4.3
For SwitchPXIe-1004
The SwitchPXIe-1004 is a 2x2 crossover switch. This means that it has only 2 valid states:
Transmit (T) and Cross.(C) The front panel LEDs on this switch will indicate which state the
switch is in. Further information can be gathered from the colour of the LEDs as such:
•
Solid green- Indicates which state the SwitchPXIe is in (default is T)
•
Solid red- Indicates there was an error in switching states. Only 1 LED will light up.
Содержание SwitchPXIe Series
Страница 1: ...SwitchPXIe Optical Switch USER MANUAL...
Страница 57: ...2 01...