Cognex In-Sight 9902L, Справочное руководство

Страница: 24 / 31

Ethernet Cable
The Ethernet cable provides Ethernet connectivity to the vision system.
P1 Pin Number Wire Color Signal Name P2 Pin Number
1 White/Orange TxRx A + 1
2 Orange TxRx A - 2
3 White/Green TxRx B + 3
4 Blue TxRx C + 8
5 White/Blue TxRx C - 7
6 Green TxRx B - 4
7 White/Brown TxRx D + 5
8 Brown TxRx D - 6
CAUTION : The Ethernet cable shield must be grounded at the far end. Whatever this cable is plugged into
(typically a switch or router) should have a grounded Ethernet connector. A digital voltmeter should be used to
validate the grounding. If the far end device is not grounded, a ground wire should be added in compliance with
local electrical codes.
Note :
l
Cables are sold separately.
l
The wiring for this cable follows standard industrial Ethernet M12 specifications. This differs from the 568B
standard.
24
Specifications