Condition
Status Indicator: Reader
Status Indicator: Base Station
Sounds
Reader out of
wireless range of
base station
Offline: When the reader wakes up
out of the wireless range, there is
no indicator.
Good read:
green
(default)
No read:
red
(default)
Reader offline: steady
red
.
Long beep when you
leave the wireless
range.
Good read: 2 beeps
No read: no beep
Reader out of
wireless range, buffer
is full
Good read:
green
and then white.
No read:
red
(default)
Reader offline: steady
red
.
Good read: long beep
No read: no beep
Wireless Reader: Charging
When you are reading codes with your wireless reader, blinking red status indicators will indicate a low battery. As the
battery discharges, the blink frequency increases. A blinking red status indicator indicates low battery or thermal
shutdown mode.
You can also check the status of the battery in the DataMan Setup Tool.
Place the reader on the base station for charging. Make sure that the pins at the end of the handle make contact with the
pins in the base station.
29
Connection Options
