7500
7550
7550
1
2
3
4
5
6
1
Status:
Red: read failed
Green: read succeeded
Blue: cordless link up
Blinking red: low battery
Trigger (press and hold to read)
Charge: Steady green: fully charged
Blinking green: charging
Status:
Steady red: connected to power
Blinking red: data transfer
Power
Data (RS-232, USB, PS/2 Keyboard)
Cable release (corded unit)
Inserting device in base establishes Bluetooth® link and charges
battery.
Scan USB Serial or RS-232 Serial configuration code from the
back of this document.
Allow the Windows Found New Hardware Wizard to run.
Select Automatic driver installation.
When prompted during driver load, click Continue Anyway.
1.
2.
Use setup tool to configure reader (shortcut on desktop)
Common tasks
Controls and information
Question and Answer help
1.
2.
3.
2
2
1
2
3
Install Software
Connect Device
Place in Base (Cordless Only)
Load USB Driver (USB Only)
Scan Connection Code
Start Setup Tool
1
USB: 42206416-01
RS-232: 42206139-04
USB: 42206161-01
RS-232: 42203758-03S
Insert CD-ROM and install software (follow prompts).
Run setup.exe if installer does not start automatically.
You must have Administrator privileges to install.
.NET Framework is installed if required.
When prompted, click Continue Anyway.
1.
•
•
•
2.
Connect base or device to PC using USB or Serial cable (PS/2
keyboard cable is not supported by setup tool.)
Connect base or device to power supply.
1.
2.
