Cognex 800-5815-1 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 57

Cognex 800-5815-1 Скачать руководство пользователя страница 28

Specifications

16

3.1

General Specifications

3.2

Acquisition Trigger Input

The 1460 I/O Expansion Module provides access to the supported vision sensor’s high-
speed, opto-isolated acquisition trigger input. Unlike the general-purpose inputs, the acquisi-
tion trigger input is wired directly to the CCD imager circuitry, thus bypassing the sensor’s
operating system. The 1460 I/O Expansion Module’s micro controller also monitors the
acquisition trigger input (Figure 3-1).

Table 3-1: 1460 I/O Expansion Module General Specifications

SPECIFICATION

DESCRIPTION

Compatibility

In-Sight 3400 and In-Sight 5000 Series Vision Sensors

I/O

Trigger

1 opto-isolated, acquisition trigger input

Inputs

8 opto-isolated discrete (general-purpose)

Outputs

10 opto-isolated discrete (2 high-speed, 8 general-purpose)
General purpose Outputs – Maximum 60V dc, 2 Amps resistive, derated
at -33mA/C for surrounding air temperatures above 25°C

Communications Serial

1 RS-232C port (1200 to 115,200 baud rates)
RxD, TxD, and Flow control (RTS/CTS)

Status LEDs

1 each for power, external lights, acquisition trigger, inputs and outputs
1 each for Camera and Remote RS-232

Mechanical

Housing

Black plastic

Mounting

#3 DIN-rail (35 mm)

Dimensions

Width: 269.2mm (10.6"), Depth: 125.4mm (4.94"), Height: 63.5mm (2.5")

Terminal Block

26 to 16 AWG
Maximum torque 0.3 Nm (2.7 in-lb)

Weight

737.1 g (26 oz.) Opto-isolators and fuses installed, w/o retention bar.

Power

Camera

24VDC ±10%, 1.25 Amps, 30W supply

1

1.

Maximum draw when the 1460 I/O Expansion Module supplies power to an In-Sight sen-
sor, and when all inputs, outputs, and LED indicators are in use. Draw will be less than
30W under typical usage.

Light Input

12VDC to 24VDC

Light Output

12VDC to 24VDC

Environmental

Temperature

0 to 50C (operating), -10 to 65C (storage)

Humidity

10 to 90%, non-condensing (Operating and Storage)

Shock

30Gs per IEC 68-2-27 (Pending)

Vibration

2Gs per IEC 68-2-6 (Pending)

Certifications

CE, UL, FCC

«
...
26
27
28
29
30
...
»

Содержание 800-5815-1


























































Отзывы:

Нет отзывов