COFFEtek VITRO X3, Техническое руководство

Страница: 57 / 69

COFFEtek LTD
57 23/02/17 Issue 1 VITRO X3

Rotate and remove the steam trap

, then remove the mixing bowl/whipper housing

by pulling the chamber towards yourself.

Remove the whipper impellor

by pulling toward you, the red whipper seal

and
the PTFE washer

.Undo the screw at the bottom of the whipper base and then turn
the whipper base

to the right and pull off.

Clean all the whipper parts in hot water using the recommended sterilising agent and
dry them thoroughly.

Remove the extract chamber from the canister shelf. Wash and dry the cover.

Clean all accessible inner and outer surfaces of the machine using a damp cloth and
wipe dry.

Replace the cleaned parts.

Replace the ingredient canister after filling with product and rotate the canister nozzle
downwards.

Switch on the machine and set on/off switch to on.

Flush the machine by pressing the FLUSH button on the internal door to ensure there
are no leaks and everything is working correctly.

Remove waste tray and grille and empty contents.

Clean waste tray and grille and replace.
Filling Procedure (Instant & Tea)
26.

Open door of machine with key provided.

Turn ingredient chutes to ensure that product is not trailed over the counter.

Lift out the product canister. Remove lid of canister and fill with correct ingredients to
within 3cm of top of canister. Do not overfill canister or compress the product in
canister.

Wipe the exterior of the canister with a clean damp cloth using the recommended
cleaning agent. Dry the canister with a clean dry cloth or paper towel.

Return the canister to the machine. Remember to turn the ingredient chutes back to a
downward facing position.

Always ensure that the canisters are located in the correct position. The ingredient
name is written on the rear of the machine to assist you.

Check that the auger at the rear of the canister is correctly aligned with the cogs at
the back of the machine.