Coemar LEDko FullSpectrum 6 HD, Инструкция по эксплуатации, Страница: 11 / 36

11
4.2
Mechanical installation
LEDko FullSpectrum 6 HD may be hung from an appropriate structure in any position or
on tripode. If hanging the fixture from a lighting truss or similar, we recommend the use of an
appropriate clamp “A”, as shown in the following diagram.
Warning!!
Always ensure that your support structure
and fixing (bolts, clamps, etc…) are rated
A to support the weight of the fixture.
A
4.3
Safety chain
When hanging it is recommended to use a safety chain, as required by current legislation. The
safety chain must pass through the handles of the unit and then attached to the structure.
If using steel cables and chains not ’s production, make sure they are suitable to support the
weight of the unit according to normative UL/ETL (required: the weight of 6 complete devices
for at least one hour).
4.4
Adjusting unit’s tilt
In order to adjust the tilt of the unit simply loose the side handle adjust the tilt and lock the yoke
by tightening the handle again.