Codesoft Image Platform CS80 Series, Руководство пользователя

Страница: 28 / 88

22
7-7 Scan mode & Some global settings
Scan mode:
Good-read off- The Camera push button can be pressed once to activate scanning. The image
platform stops scanning when there is a successful reading or no code is decoded after the Stand-by
duration elapsed.
Continue-The image platform always keeps scanning, and it does not matter when Stand-by duration
is elapsed.
Timeout off-The Camera push button can be pressed once to activate scanning. The image platform
stops scanning when no code is successful decoded after the Stand-by duration elapsed.
Same barcode delay time: If a barcode has been scanned and output once successfully, the image
platform must output the same barcode data beyond delay time. When this feature is set to be “0xFF”,
then the delay time is indefinite.
Double confirm: If it is enabled, the image platform will require a several times of same-decoded-data to
confirm a valid reading.
Global Max./Min. code length: These two lengths are defined as the valid range of decoded barcode
data length. Make sure that the minimum length setting is no greater than the maximum length setting, or
otherwise the labels of the symbol will not be readable. In particular, the same value can be set for both
minimum and maximum reading length to force the fixed length barcode decoded.
Notes:
1. Please set the max./min. length for individual barcode in later sections, if special demand is
requested.
2. The number of check digits is included in max./min. code length.
3. These two settings have no effect on the symbols with fixed-length, e.g. UPC-A, UPC-E, EAN-13,
EAN-8 and China Post.
Global G1-G6 string selection: The image platform offer one or two string group for all symbols. By
setting one or two digits to indicate which string group you want to apply. You may refer to the chapters
of “String setting” and “String position & Number of truncated leading/ending character”.
Example: Group 1 → set 01 or 10. Group 2 and 4 → set 24 or 42.
All valid settings include 00, 01, 02, 03, 04, 05, 06, 10, 11, 12, 13, 14, 15, 16, 20, 21, 22, 23, 24, 25, 26,
30, 31, 32, 33, 34, 35, 36, 40, 41, 42, 43, 44, 45, 46, 50, 51, 52, 53, 54, 55, 56, 60, 61, 62, 63, 64, 65 and
66.
Element amendment: If it is enabled, the image platform can read the barcode comprised with bars and
spaces in different scale.
Character output restraint:
Printable character only- If this option is selected, the image platform will output the printable
characters only, i.e. in ASCII from 20H to 7EH.
Alphanumeric character only- If this option is selected, the image platform will output the alphanumeric
characters only, i.e. “A”-“Z”, “a”-“z”, “0”-“9”.
Decoder optimization: If it is enabled, the image platform will optimize the decoder with error correction.