background image

2

2009 Audiovox Electronics Corporation. All rights reserved.

Table of Contents

Using Your Remote Control ............................................................... 3

Arming the Security System ............................................................ 3
Passive Arming Bypass ................................................................... 3
Bypassing the Shock Sensor .......................................................... 3
Hidden Alarm Function ...................................................................... 3
Disarming the Security System ........................................................ 3
Valet Mode ........................................................................................ 4
Manually Overriding the Security System ....................................... 4
Eliminating Arm/Disarm Notification Chirps ...................................... 4
Activating Trunk Release (optional) ................................................ 4
Using the Car Finder Feature ........................................................... 4
Using the Personal Protection Alarm ............................................... 5
Car Jack Mode .................................................................................. 5

LED and Siren/Horn Indications ......................................................... 6

Transmitter Button Functions ........................................................... 7

Replacing Remote Control Batteries ............................................... 7

Warranty Information ........................................................................... 8

Содержание CA 1050











Отзывы: