Codan Envoy 2220, Руководство по началу работы

Страница: 80 / 115

C
ONTACTS
A
DDING A CONTACT
70 E
NVOY
™ T
RANSCEIVER
G
ETTING
S
TARTED
G
UIDE
Adding a contact
Contacts are used to pre-define the typical calls that you want to
make to another person. For each contact you can define a number
of calls. Each call contains information about:
• the call system that you want to use
• the type of call that you want to make to the contact
• the address or telephone number of the station at which this
contact may be located
To add a contact:
1
From the main menu, select ( User Data ), then
( Contacts ).
1
Select (
Contacts
) or (
Emergency Contacts
), as
required.
1
Press ( Add ).
1
Enter the name that you want to use for the contact, then
press
(
Add Call
).
The HF Network entry is highlighted.
1
Press or to scroll through the available HF networks
until the one you want to use is shown.
1
Press to move to the Call Type entry.
1
Press or to scroll through the available call types until
the one you want to use is shown.
NOTE: The call type that you select affects
information that you can enter for the
remainder of this call.