Codan 3048, Руководство по установке

Страница: 19 / 53

I
NSTALLING THE ANTENNA
G
ENERAL
3048 T
UNED
D
IPOLE
A
NTENNA
I
NSTALLATION
H
ANDBOOK
11
Required tools
The following customer-supplied tools are required during
installation:
• 19 mm spanner for the base fixings
• 13 mm spanner for the mast and head unit fixings
• 12 mm spanner for the U-bolts
• flat-blade screwdriver for the compression clamps
• knife to cut cable ties
• spirit level
NOTE:
A step ladder may be used to support the head unit
while it is being assembled.
Footprint of the antenna
The mast and antenna require a certain amount of clear ground
during installation, as shown in
Figure 2 . The base plate for the
mast must be oriented correctly to allow the mast to lay on the
ground during installation, as shown in
Figure 3 .