After Sales Support 1300 663 907
www.winplus.com.au
1.
UNPACK
Unpack the contents from the box
• 1 x Cocoon Bluetooth Speaker
• 1 x 3.5mm Audio Cable
• 1 x Micro USB Charging Cable
• 1 x Getting Started Guide
• 1 x Warranty Card
2.
CHARGE YOUR SPEAKER
Before first use, it is recommended that you charge your Bluetooth Speaker
for a minimum of 1 hour. Connect the supplied Micro USB charging cable to
the Micro USB port on the bottom of the Bluetooth Speaker (this is covered
by a rubber seal). Connect the other end to a spare USB port on your
laptop, computer or USB wall charger (not included).
3.
POWER ON / OFF
Press and hold the Power Button for 3 seconds to switch on or off.
4.
ACTIVATE BLUETOOTH SPEAKERS PAIRING MODE
While the Bluetooth Speaker is off, press and hold the power button down
for 3 seconds. The Bluetooth Speaker will turn on and enter pairing mode
automatically. The Bluetooth Speaker will give an audio cue “The Bluetooth
Device Is Ready to Pair”. When the Bluetooth Speaker has been paired to
another device, the Bluetooth on that device will need to be turned off to
allow another device to pair.
5.
SEARCH FOR THE BLUETOOTH SPEAKER
Activate the Bluetooth feature on your MP3 player or smartphone.
Search for the device “HE170611S” and pair as per your MP3 player or
smartphone’s instruction manual.
6.
SUCCESSFULLY PAIR WITH THE BLUETOOTH SPEAKER
When the Bluetooth Speaker is successfully paired with your device
the Bluetooth Speaker will give an audio cue “The Bluetooth Device Is
Connected Successfully”. Your MP3 player or phone will remember pairing
with the speaker for future use.
7.
START AUDIO PLAYBACK
Start audio playback on your phone or MP3 player. Control the volume and
track playback using the control pad located on the top of the Bluetooth
Speaker. To increase/decrease the volume, hold down the + or - buttons. To
skip songs short press the or buttons. To pause music short press the
Power Button.
Getting Started Guide
Model Number: HE170611S
PLU: 59381
11/2017
Hold for volume
Press to skip
Press to Pause/Play
Hold for 3
seconds to
turn on and
enter pairing
mode
