Before you begin, make sure you have:
1.
A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2.
Batteries installed and charged via USB charging cable
Note: It will take approximately 10 hours for batteries to fully charge
3.
A Wi-Fi connection (have the password handy)
4.
Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
Ensure that LED indicator light around the Smart Doorbell button is
flashing Red for pairing mode. Refer instruction manual if it is not
Scan this code
or search for
Cocoon Connect
First time users:
Register an account and follow the remaining prompts on screen
2. SELECT SMART
CAMERA (IN
SECURITY & SENSOR)
1. ADD NEW
DEVICE
3. Confirm pairing mode
4. Add the DOORBELL
1. BEFORE YOU START
2. App Setup
INDICATOR
LIGHT
