8.Rechargeable batteries will be charged only under adult supervision (if
removable).
3. Assembly Instruction:
According to Fig 1,insert those 6 blocking devices into their positions. As the
picture shown on Fig 2, insert the global wheels into the holes under the front
bottom. Finally, insert those two shake-reducing stopper wheels into the holes
under the rear bottom according to Fig 3. All of the parts are fixed completely as
shown on Fig 4.
2) Assembly of fabric seat:
5.Exhausted batteries are to be removed from the toy.
6.The supply terminals are not to be short-circuited.
The music will come out after you fix the batteries by pressing the buttons on the
toy tray(See Fig14).As the picture shown on Fig 14,there are 4 snap-fit
components (a, b) on both front and rear toy tray.
Firstly, insert those 5 pins in the front of the seat, into the holes on the upper tray
referring to Fig 5&6&7. Then put those belts with buckle at the back of seat
through the holes on the upper tray according to Fig 8&9, the belt is fixed firmly
as Fig 10 shown. The fabric seat is fixed completely as shown on Fig 11.
A) Assembly of battery:
2)As the arrow shown on Fig 15, fix the rear toy tray into the upper tray, and
then press down the front toy tray to fix the toy tray, make sure the snap-fit
components are fixed firmly on their position ( see Fig 16).
2.Different types of batteries or new and used batteries cannot be mixed.
3.Only batteries of the same or equivalent type as recommended are to be
used.
7.Rechargeable batteries are to be removed from the toy before being charged
(if removable).
3) Assembly of toy tray:
1) Assembly of the parts under the bottom base:
2) Insert two 1.5V batteries inside, ensure correct polarity (see Fig13).
3) Screw battery cover back on.
B) Assembly of toy tray:
1)Musical toy tray: switch on the musical-control button under the music toy tray
after you assemble on the battery.
1.Non-rechargeable batteries are not to be charged.
1) Use a screwdriver to unscrew the battery cover (See Fig 12).
WARNING!
4.Batteries are to be inserted with the correct polarity.
EN