Adjust the volume by turn the Power/Volume
button clockwise or anti-clockwise. As you
adjust the volume you will see the circular LED
light display grow or shrink accordingly.
Light Mode
Press and hold the
Play/Pause button to turn
on the light. The light can also be turned off by
pressing and holding the Play/Pause button
again.
Radio
Press Mode button to select Radio mode. The
“Rad” will be steady red on the LED display.
To begin scanning FM radio stations, press
the Play/Pause
button this process may take a
few minutes so please be patient. Once all the
stations are automatically downloaded and
stored you will hear the radio begin to play and
cycle through stations. When you arrive at the
station you want to listen to, press the
Play/Pause button again to stop cycling.
To manually switch FM radio stations, press
Previous Track/Channel button and Next
Track/Channel button.
Note:
if reception is not good you can plug in the included 3.5mm
AUX cable to increase signal.
8
