OPERATION INSTRUCTIONS
WARNING!
Read all instructions carefully. Do not
connect the scarifier to the mains supply power
before it is completely assembled. Always wear
gloves during assembly.
1. INTENDED USE
1). This scarifier and raker is designated with a rated input
of 1300 Watts. Depending on the fitted cutting device, this
product is intended for either scarifying and removing
thatch from lawns or for raking in domestic and hobby
gardens.
2). When used as a scarifier, this product works by
scratching through and between the grass with specially
adapted prongs that collect and remove any unwanted thatch
from the lawn, whilst leaving the grass blades intact. At the
same time the product scarifies the ground resulting in a
better airing.
3). When used as a raker, the fine needles will scratch the
surface of the lawn while simultaneously picking light debris
for better oxygen absorption, airing and draining.
4). This product is not to be used in wet weather conditions
and may not be used on overly dry, wet or unusually high
grass, e. g. pasture grass or for shredding leaves.
5). This product is intended for private domestic use only,
not for any commercial trade use. It must not be used for
any purposes other than those described.
Fig. 1a
2. ASSEMBLY INSTRUCTIONS
Follow the operating instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
machine.
1). HANDLE BAR ASSEMBLY
a). Align the lower handle bars (6) with the supports (8). Make
sure the holes in the lower handle bars correspond with those
in the supports (8) and secure the bars with one screw (7)
each to the support (8).
(See Fig. 1a, 1b).
Fig. 1b
26/02/2013 v1
12
6
7
6
8
