Cobra microTalk LI 7020 WX Скачать руководство пользователя страница 10

Страница: 10 / 17

Customer Assistance

Warranty

Introduction

Operation

Mode Functions

Operation

To recall a stored memory channel location:
1.

Press the

Mode

button until the

Memory

icon

and the memory location number flash on the
display.

Press the

Channel Up

Channel Down

button to select a memory location
(0 through 9).

If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.

Press the

Talk

button to return to

Standby

mode on the selected memory location.

A memory location can be reprogrammed
at any time it is displayed and flashing.
Press the

Lock/Enter

button to begin.

While recalling a stored memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to

Standby

mode on the channel/privacy code displayed
before you entered mode functions.

Choose one of the following:

Press the

Channel Up

Channel Down

button to select a CTCSS privacy code
(01 through 38) for the channel.

Press the

Lock/Enter

button to

switch from CTCSS to DCS. The DCS
icon and privacy code numbers will
flash on the display. The

Channel Up

Channel Down

button can then be

used to select a DCS privacy code
(01 through 83) for the channel.

If “OFF” flashes in place of the privacy
code numbers, a privacy code is
already set in the opposite (CTCSS
or DCS) system. Press the

Channel Up

Channel Down

button to cancel

the opposite code and select a privacy
code from the active system for the
selected channel.

Choose one of the following:

Press the

Lock/Enter

button to enter

the channel/privacy code in the selected
memory location. Radio then proceeds to
next Memory location, which will blink.

Press the

Mode

button to

enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.

Press the

Talk

button to enter the

channel/privacy code in the selected
memory location and exit mode functions.
Upon release of the

Talk

button, the

radio will enter

Standby

mode on the

channel/privacy code just entered.

Channel Buttons

Memory Icon

Mode Button

Содержание microTalk LI 7020 WX


















Результаты поиска

Содержание microTalk LI 7020 WX

Отзывы:

Похожие инструкции для microTalk LI 7020 WX

Бренды по названию

Популярные бренды

Cobra microTalk LI 7020 WX, Руководство пользователя

Результаты поиска

Содержание microTalk LI 7020 WX

Отзывы:

Похожие инструкции для microTalk LI 7020 WX

Бренды по названию

Популярные бренды