3. Operating The ESD-6500:
A. Turn On and Adjust Volume
B. Set Display Brightness
C. Set City/Highway Mode
D. Set Muting Mode
E. Indicators and Visual Alerts
Power
Radar
Laser
VG-2
Safety Alert
®
Traffic Warning System
Muting
NORMAL
LOW 1
LOW 2
OFF
OR
OR
OR
OR
Installing and Using Your
DETECTION SYSTEM
Model ESD
™
-6500
U.S. Patent No. 5,497,148
Cobra Electronics Corporation
6500 West Cortland Street,
Chicago, Illinois 60707
PRINTED IN KOREA
©1997 COBRAELECTRONICS CORPORATION 480-265-P-001
1. What You’ll Need To Install The ESD-6500:
NOTE: Detailed instructions on opposite side
ESD-6500
Windshield Bracket
Hook and Loop Material
Power Cord
(For on-dash mounting)
NEED HELP?
CITY
For urban driving-re d u c e s
number of X-Band audible
a l e rt s .
HIGHWAY
For all other driving.
Auto Muting
Automatically reduces
volume of alert in progress
after 3 seconds.
Manual Muting
Press to reduce volume of
alert in progress.
To Switch Between Modes
P ress the Mute Button when
no signal is being received. In
Auto mode, the display will
show an “M” on the far right.
Display is briefly
illuminated in the Test
mode at Power ON.
NOTE: For your
convenience, Display Dim,
City/Highway, and Muting
mode settings are retained
in memory.
Band Signal Strength
(Shows City/Highway Mode when power is on)
Auto Mode
Manual Mode when Mute Button is pressed
➧
➧
➧
ON WINDSHIELD
ON DASH
ATTACH CUPS TO BRACKET
PEEL PROTECTIVE PAPER OFF ONE SIDE OF HOOK AND LOOP
ATTACH BRACKET TO WINDSHIELD
PLACE ON DASH
ATTACH DETECTOR TO BRACKET
PEEL TOP PAPER OFF
BEND BRACKET FOR CORRECT DETECTION ANGLE (IF NEEDED)
PLACE DETECTOR ON HOOK AND LOOP PAD
PLUG POWER CORD INTO DETECTOR
POWER CORD INTO DETECTOR
PLUG POWER CORD INTO CIGARETTE LIGHTER
PLUG POWER CORD INTO CIGARETTE LIGHTER
2. Installing The ESD-6500:
