Quick Start Guide
Printed in China Part No. 480-777-P Version A
Use this instruction sheet for pairing with
iOS devices. If you have an Android
™
device, use the other quick start guide
included in this package.
Cobra iRadar uses
Bluetooth
®
wireless
technology to connect your iPhone
®
/iPod touch
®
to display radar alerts and change settings.
Follow these simple steps to get your
Cobra iRadar up and running.
Cobra iRadar is made for
:
iPhone 4S
iPhone 4
iPhone 3GS
iPod touch (4th Generation)
iPod touch (3rd Generation)
NOTE:
*Location-based alerts and GPS
settings available only with iPhone.
Only radar/laser alerts and settings
will work with iPod touch.
Connecting with Cobra iRadar
Plug in your Cobra iRadar detector unit using
the included cigarette lighter adapter.
Turn unit on. A red LED will light. Make sure the
iOS/Android toggle switch is switched towards
the
white
circle. This will allow the unit to com-
municate with your iPhone or iPod Touch. When
switched toward the green circle, your iRadar
will only communicate with Android devices.
On your iPhone/iPod
touch, enter
the
Settings
menu.
Press
General
, then
Bluetooth
. Make sure
Bluetooth is switched
to
ON
.
NOTE:
This device complies with part 15 of FCC rules: Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received
including interference that may cause undesired operation.
CAUTION:
Modifications or parts not approved by Cobra Electronics
Corporation may violate FCC Rules and void authority to operate this
equipment.
For Pairing With iOS Devices
Power/Volume Wheel
iOS/Android Mode
Toggle Switch
iRAD150_iOS_QSG.indd 1
3/20/12 4:18 PM
