Cobra AK4169, Руководство пользователя

Страница: 13 / 19

12
3.5. Vehicle finder
This feature is enabled by default and can be disabled by your Cobra or Toyota dealer.
Vehicle finder enables the user to manually flash the hazard lights 4 times to help locate
the vehicle when the system is in the fully armed state.
To activate vehicle finder, proceed as follows:
Activation steps
Hazard light
indication
Alarm status light (LED)
1
Lock the vehicle
using the remote
control
Flashes once ON for 30 seconds
2 After 30 second - LED flashes (at a steady rate)
3
Press remote
control lock button
once
Flashes 4 times LED flashes (at a steady rate)
3.6. Alarm memory
If the alarm went off during your absence, the hazard lights will flash 5 times when the
doors are unlocked and the system will chirp 5 times.
The system memorises the last alarm trigger. This can then be identified by counting the
number of flashes of the alarm LED before switching the ignition ON.
1 flash:
Doors
2 flashes: Intrusion (ultrasonic) sensor
3 flashes: Bonnet
4 flashes: Ignition switch (hot wire)
5 flashes: Boot / Side doors
6 flashes: Alarm system wiring or siren
7 flashes: Optional sensor
Note:
- There is a pause of 2 seconds between 2 different alarm memories.
Important:
- If you suspect that the alarm system is sounding due to false alarms, please count the
number of LED flashes and contact your Cobra or Toyota dealer.