COBHAM SAILOR 900, Руководство по установке

Страница: 96 / 245

Configuration with the web interface
6-28 Chapter 6: Configuration 98-150471-A02
•
FCC (FCC §25.205)
: 5 degrees
7. Click
Apply
to save the settings for the satellite profile.
6.3.3 To set up blocking zones (RX and TX)
On this page you define blocking zones, i.e. NO TX and RX zones, enter azimuth values and
elevation angles for each blocking zone
.
You must select
Active
to enable a blocking zone.
To set up a blocking zone, do as follows:
1. Select SETTINGS > Blocking zones .
2. Select
Active
to enable the blocking zone.
Figure 6-21: Web interface: SETTINGS, Blocking zones — azimuth and elevation
SAILOR900HP.book Page 28 Monday, July 18, 2016 12:44 PM