COBHAM SAILOR 900 Ka, Руководство по установке

Страница: 98 / 182

Keypad and menus of the ACU
6-38 Chapter 6: Configuration 98-146706-A
6.5 Keypad and menus of the ACU
6.5.1 ACU display and keypad
In the ACU display you can see the current state of the system. You can also see events
(warnings, errors and information) and how the system has been configured. Use the
keypad to navigate through the menu tree.
1. Current status of the SAILOR 900 Ka:
NOT READY (Waiting for input from GNSS, e.g. GPS)
READY (no satellite profile selected)
POINTING ANTENNA (Locating the satellite)
ACQUIRING SIGNAL (Acquiring the satellite signal)
TRACKING (Tracks the current satellite)
FREQUENCY SCANNING (Scanning for transponders)
BLOCKING ZONE (Antenna is pointing into a blocking zone)
2. Current menu, see The menu tree on page 6-39.
3. NAV : Navigational information
First letter:
G
(Valid GPS signal received from the GPS module) or
g
(No valid GPS fix)
Second letter: H (Valid ship heading data received from the ship’s gyro) or h (No valid
heading data).
4. MDM : Current status of the modem: TEST, ERROR, READY, INIT, RXOK, ACQ,
NETOK, RESET, OFF
5. LAN : LAN connectors used, 1 , 2 , 3 , 4 , – .
6.
SAT
: Longitude, satellite position of the currently active satellite profile.
7. RX:
1 (Rx1 Lock, - or 1 ),
- (Rx2 Lock, - or 2 ),
L (RX polarisation of currently active satellite profile: H (horizontal), V (vertical), L (left-
hand)
R
(right-hand).
8. RF tracking frequency in GHz and LNB LO Frequency.
9.
TX
: <Extern mute> <Modem TX> <ADU TX> <TX pol>
Read the TX status as follows: Upper case: Ok, lower case: Not ok.
Figure 6-31: Display and keypad of the ACU (example)
6 7 8 9 Signal strength
0DLQ1$9*+0'01(72./$1±
75$&.,1*
6$7:5;/+7;0$5
1 2 3 4 5
SAILOR900Ka-IM-98-146706.book Page 38 Thursday, July 16, 2015 11:07 AM