COBHAM SAILOR 6280, Руководство пользователя

Страница: 41 / 90

Settings
98-135323-H Chapter 2: Operation 29
Test Message
Use
Test Message
to check that the SAILOR 6282 AIS Transponder can send a
text message to and receive a text message from other transponder systems.
This test is done automatically. No action from the message recipient is required.
A target with at suitable range (15-25 NM) is selected if such a target has been
received by the SAILOR 6282 AIS Transponder. The SAILOR 6282 AIS
Transponder supports
AIS SART Test
messages and
COM Test
messages.
To receive an
AIS SART Test
do as follows:
1. Unlock the page by tapping
Authorize changes
and entering the user-level
password.
2. Tap the
AIS SART Test
selection box to enable the display of AIS SART Test
targets.
To start a COM Test do as follows:
1. Tap the
COM Test Target
to select a target for testing communication. This
target responds by an automatic acknowledge from the displayed MMSI
number. For each tap the test target changes because there are some rules to
be followed (e.g. the AIS Transponder may not select closest or most distant
target, it must toggle to new target after test message is sent for new test
message)
2. Tap
Start COM Test
. The test starts and the result of the communication
test is shown on the screen.
Figure 22: Settings – Test Message (example)
Swipe
up or
down