COBHAM SAILOR 6120, Руководство по установке

Страница: 77 / 116

Chapter 4: Configuration
SSA buttons configuration (SAILOR 6120 only) 65
4444
Configuration
4.6 SSA buttons configuration
(SAILOR 6120 only)
Before using SSA buttons, you have to configure:
• SSA recipients
• SSA button type
• SSA message repeat rate
This section describes SSAS configuration using commands with a
command interface as described in the previous section.
4.6.1 To configure the SSA recipients
If your system uses SSA buttons, the SAILOR 3027 must be configured with
the recipient(s) of the Ship Security Alert. The recipients must be selected
according to the Flag Administration under which the vessel is sailing. The
recipients can be:
• e-mail addresses
• phone numbers (SMS)
• fax numbers
• telex numbers.
Specifications of the SSA routing requirements are found in IMO SOLAS
Regulation XI-2/6 and in IMO Circulars MSC/Circ.1072 and MSC/Circ.1073.
Note You can also use LocPoint for configuring your SSAS. LocPoint is a
VMS and tracking solution available from Cobham SATCOM. It has
a web based user interface and can be used for remote
configuration of your SSA system.