COBHAM SAILOR 6120, Руководство по установке

Страница: 60 / 116

Chapter 4: Configuration
48 Register your SAILOR 3027
4.1 Register your SAILOR 3027
4.1.1 Service Activation Registration Form
Before using the SAILOR 3027 mini-C terminal on the Inmarsat C system
you must register the terminal.
Use the Service Activation Registration Form (SARF) supplied with the
SAILOR 3027. A copy of page 1 of the SARF is shown in the next page. As a
guide, some of the most important fields are filled in with red color.
Note
that the stated MES (Mobile Earth Station) model is just an
example
- the field must show the MES model you are registering.
The SARF for registration of Maritime MES (in this case the SAILOR 3027)
can also be found on
www.inmarsat.com/Support under
Activation
,
including notes on how to complete the maritime form.
The SARF contains different abbreviations that are explained here.
The SAILOR 3027 must be registered at either a PSA company or directly to
the ISP. A PSA is a company handling the activation of Inmarsat mobiles
and is short for Point of Service Activation. ISP is the company that
provides the Inmarsat service and is short for Inmarsat Service Provider. In
many cases the PSA and ISP is the same company that also operates a Land
Earth Station (LES). The local PSA or ISP can be obtained by following the
guidelines in the registration form.
The SARF also includes billing information for the Inmarsat C service. The
payment will be made directly to the Accounting Authority (AA). In many
cases the AA is also the same company as the ISP.
In addition to the general information such as name and address, the
Inmarsat Serial Number (ISN) of the SAILOR 3027 must be specified. The
ISN is found on the Delivery Note and on the label in the bottom of the
SAILOR 3027 mini-C terminal.
Note In most cases the distributor registers the system for the
customer.