COBHAM SAILOR 6120, Руководство по установке

Страница: 34 / 116

Chapter 3: Connect the system
22 Connect the units
3.1.1 Wiring overview
The cables and connectors marked with
W
and
C
in the drawings are listed
in the table in Cables and connectors on page 28.
3.1.1.1 SAILOR 6120 SSA System
The drawing below shows the wiring of a basic SAILOR 6120 SSA System.
If you have more than two alert buttons, you can connect an alert button
to each of the terminal blocks X7 to X12, using the same pins as in X8 and
X10 shown above.
For details on wiring of SSA buttons, see SAILOR 6194 Terminal Control
Unit, Installation and user manual [3].
Note In all the mini-C systems you can also connect a computer. For
details, see
SAILOR 6120/30/40/50 with a computer on page 27.
6$,/25
7HUPLQDO&RQWURO8QLW
6$,/25
66$7HUPLQDO
&$1
&$1EXV
&$1;
6KLSJURXQGKXOO
3RZHUVXSSO\
'&RXWSXW
6KLHOG
:
:
&
&KDVVLV
66$
WHVW
EXWWRQ
66$
DOHUW
EXWWRQ
66$
DOHUW
EXWWRQ
; ; ;
:
%URZQ %URZQ
*UHHQ
*UHHQ <
HOORZ
<
HOORZ
%URZQ <
HOORZ
*UHHQ :KLWH
&KDVVLV
Important
If you are not using all terminal blocks assigned for SSA alarm
buttons (X7 to X12), make sure pin 1 and 2 are shorted in the
terminal blocks that are not used. This only applies to the
alarm buttons X7 to X12, not to the test button X14.