COBHAM SAILOR 6000B, Руководство пользователя

Страница: 23 / 82

Chapter 2: Operation
Set up a telex call 13
2222
Op
er
at
io
n
Set up a telex call
Set up the transmission mode
The Radiotelex system has three transmission modes:
•
ARQ
(Automatic Repetition reQuest): A mode where two stations can
communicate without breaking the connection. The direction is
changed with an “over” command.
•
Selective FEC
(Forward Error Correction): A one-way mode to one
station.
•
Broadcast FEC
: A one-way mode broadcast to all stations. E.g. used in
distress situations or for news or coast station traffic lists.
To set up the transmission mode, do as follows:
1. From the main menu, select
Call
.
Note The system must be configured and enabled before use. See
Before you start on page 6.
Note You can enable the use of Cyrillic characters on screen under
System > Settings > Cyrillic characters
. For details, see To
use Cyrillic characters on page 26.
Note If Telex is not selected in the MF/HF radio you get a warning
that the radio is occupied. Use the Mode button on the radio
to switch to Telex.