COBHAM explorer 727, Руководство пользователя

Страница: 39 / 179

Chapter 3: To operate the system
98-126882-F To use a phone or fax machine 32
To make a call to the terminal
To make a call to a phone connected to the terminal, dial
+ <Mobile number>
•
+
is the international call prefix
1
used in front of the country code for international calls.
• Mobile number . The first part of the mobile number is always 870, which is the “country
code” for the BGAN system. If the mobile numbers are listed in the web interface, you can
look them up as follows:
Connect a computer, access the web interface and select
PHONE BOOK > Mobile
numbers
. For further information, see To view and edit the mobile numbers on page 58.
If the mobile numbers are not available in the web interface, refer to the documents
included with your airtime subscription.
To receive a voice mail message
If a call to the EXPLORER system is not answered the caller can leave a voice mail message with
Inmarsat’s voice mail service. Then an SMS is sent to the EXPLORER messaging system to alert
you that there is a voice message. The SMS has the contents:
• Number called from
• Date and time the voice mail message has been received
• Number to call to listen to the voice mail message
To see that a new SMS has arrived you open the web interface. For further details see To
receive a message on page 63.
To make local phone calls
You can make local calls between various phones connected to the terminal.
Local phone numbers always start with 0.
For an overview of the numbers assigned to each type of interface, see Local numbers and
special-purpose numbers in the next section.
To make a local call, dial
<local number>
followed by
#
or off-hook key.
Note
By default all phones connected to the terminal will ring on incoming calls. However,
this depends on the configuration of the interfaces in the terminal. See
To select the
call type
on page 29.
1. The plus sign indicates the code required to dial out of one's country code area, such as 00 in
most of Europe, 011 in the United States, and other short codes in other parts of the world.
Note
If you are using local numbers for ISDN devices, the numbers must be programmed in
the devices. For further information refer to the documentation for your ISDN device.
Local numbers for IP handsets are automatically assigned when a new handset is
connected.