manualshive.com logo in svg

COBHAM EXPLORER 5075, Руководство пользователя и инструкция по установке

Поделиться
Скачать
COBHAM EXPLORER 5075 Скачать руководство пользователя страница 56

Status signalling with LEDs and status messages

5-12

Chapter 5:  Service

98-143492-D

Software update (modem)

The modem detects automatically whether a software upgrade is needed. If yes, software 
upgrade is done automatically via the satellite link. You can see the current software version 
in the web interface of the GX modem (Core Module). See 

GX Modem: One Touch 

Commissioning (OTC)

 on page 5-7 for information how to connect to the web interface of 

the GX modem.

Software recovery (safe mode)

If the EXPLORER 5075GX has become inoperative, a software recovery update may bring it 
back into an operational state.

To make a software recovery, do as follows:

1. During reboot push and hold the arrow keys 

 and 

 on the keypad. The text 

safe 

mode

 is shown in the display. The network settings are reset to factory default 

(http://192.168.0.1).

2. Open an Internet browser and enter the address http://192.168.0.1. A web interface is 

displayed.

3. Upload new software or reset to factory default.

4. Reboot the EXPLORER 5075GX.

5.3

Status signalling with LEDs and status messages

Built-In Test Equipment

The EXPLORER 5075GX has a Built-In Test Equipment (BITE) function in order to make fault 
diagnostics easy during service and installation. The BITE test is performed during:

• Power On Self Test (POST), which is automatically performed each time the system is 

powered on.

• Person Activated Self Test (PAST), which is initiated by starting a self test in the web 

interface 

HELPDESK > Self test

. 

For details on error messages after a POST or a self test see 

Event list

 on page 5-3 and 

System messages

 on page B-1.

Means of signalling

The EXPLORER 5075GX provides various methods for signalling the system status. There are 

LEDs

 on the front panel of the ACU to signal Power on/off, Logon and Fail/Pass. There is 

also the built-in web interface of the ACU which shows any events (BITE error codes) with a 
short message describing each error. This is also displayed in the ACU.

In an error situation, one of the following system status messages may be shown:

• ACU POST error

• ADU POST error

• SAFE MODE (plus information about the specific error, see 

System messages

 on page B-

1).

Содержание EXPLORER 5075









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды