COBHAM EXPLORER 323, Руководство пользователя и инструкция по установке

Страница: 77 / 158

Chapter 5: Configuration with web interface
98-169085-B Advanced LAN 68
Advanced LAN
Port forwarding
Port forwarding enables you to set up a server connected to the terminal while the terminal is
in Router mode. Without port forwarding it would not be possible to contact the server from
the Internet. We recommend using a static public IP address for the terminal in order to
provide easy access to the terminal. To use the static IP address, it must be included in your
subscription and you must set the APN source to SIM default. For details, see
To change the
APN for a connection package on page 50.
The following example shows how to allow Internet access to a mail server (smtp) connected
to the terminal. The mail server in this example has the IP address 192.168.0.100.
1. From the
Control panel
gears
, select
Advanced LAN > Port forwarding
.
2. Select + Forward port to add a new port forwarding.
3. Select
Active
to activate the port forwarding.
4. Type in the
Incoming port start
and the
Incoming port end
.
This is the range of port numbers on the EXPLORER 323 for which incoming traffic to the
EXPLORER 323 will be forwarded.
5. Type in the Destination IP address , which in this example is the IP address of the mail
server: 192.168.0.100.
This is the IP address to which the incoming traffic is forwarded.
6. Type in the
Destination port start
and the
Destination port end
.
This is the range of port numbers at the server, to which the incoming traffic will be
forwarded. If only a single port is used, type the same port for
Destination port start
and
Destination port end
.
7. Click
Save
.
When you have activated a data connection, you can now access the server from the Internet,
using the external IP address of the terminal. If you are using the web interface, you can see
the external IP address in the tile with the data connection you have started. For information
on how to activate your data connection, see
To start and stop data connections on page 24.
To add more ports for port forwarding, select
+ Forward port
again and repeat the procedure
above.
As an alternative to Port forwarding, you may use a dedicated connection, see To set up
dedicated connections on page 56.
Note
Make the port forwarding configuration before starting the data session.