Chapter 5: Configuration with web interface
98-169085-B
Terminal settings
62
To set up the connection mode
Internet and LAN connection modes
In the web interface you can set up the Internet connection mode and the IP addressing
between the EXPLORER 323 and devices connected to the EXPLORER 323. The EXPLORER 323
has a built-in DHCP server which can be used to dynamically assign IP addresses to devices
connected to the EXPLORER 323.
The drawing below shows examples of the IP addressing in router mode (default setup) and
bridge mode.
Router mode
(Default setup, example)
Terminal
Device 1
Device 2
192.168.0.1
192.168.0.1
192.168.0.n
(assigned by the
terminal via DHCP)
192.168.0.m
(assigned by the
terminal via DHCP)
BGAN network
(DHCP server)
161.30.181.130
(assigned by the BGAN
network via DHCP)
Bridge mode with active connection to the BGAN network
(Example)
Device 1
Terminal
161.30.181.130
(assigned by the BGAN
network via DHCP)
161.30.181.n
NAT
DHCP
BGAN network
(DHCP server)
161.30.181.n
Bridge mode, no connection to the BGAN network
(Example)
Terminal
BGAN network
(DHCP server)
161.30.181.n
Device 1
192.168.0.1
(Local IP address)
DHCP
192.168.0.n
(assigned by the
terminal via DHCP)
192.168.0.1
(Local IP address)
