COBHAM AVIATOR 200 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 126

COBHAM AVIATOR 200 Скачать руководство пользователя страница 63

Chapter 3: Operation

AVIATOR Wireless Handset menus

53

3333

Oper

ation

Status

In the Status section you find the serial number of the AVIATOR Wireless
Handset and the network settings. Use this menu to display the software
version of the AVIATOR Wireless Handset.

To view status for the handset, do as follows:

1. From the main menu, select

Status

.

2. Select

Phone identification

to see

the serial number of the AVIATOR
Wireless Handset.

3. Select

Network information

to see:

• DHCP Enabled/Disabled
• IP  address
• Subnet  mask  address
• Default gateway
• Physical  address  (MAC)

4. Select

Software version

to see the

version of the AVIATOR Wireless Handset software.

5. Select

Legal information

to see the FCC ID of the handset.

Network

To connect the AVIATOR Wireless Handset to the wireless
network

If the handset has been connected to the wireless access point before, it
will automatically attempt to establish a connection as soon as the access
point is within reach.

Note

The Wireless network menu described in the following sections is
only available in the wireless handset. For the wired handset, go to

To select the IP address mode

«
...
61
62
63
64
65
...
»

Содержание AVIATOR 200































































































































Отзывы:

Нет отзывов