COBHAM AVIATOR 200 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 126

COBHAM AVIATOR 200 Скачать руководство пользователя страница 49

Chapter 3: Operation

AVIATOR Wireless Handset functions

39

3333

Oper

ation

+870 <Mobile number>

•

+

is the prefix used in front of the country code for international calls.

This is

00

when calling from most countries.

•

Mobile number

: The mobile number of the SwiftBroadband unit you

are calling.

Example:

If you are calling from Denmark and the mobile number for 3.1
kHz Audio is 772112345 on your SwiftBroadband unit, and you
want to make a call to the SwiftBroadband unit using 3.1 kHz
Audio, dial

00 870 772112345

.

To see the mobile numbers of your SwiftBroadband unit, refer to the
information included with your airtime subscription.

For more information on call types and the SwiftBroadband unit, refer to
the user manual for your SwiftBroadband unit.

Making a secure call from the AVIATOR Wireless
Handset

The AVIATOR Wireless Handset supports secure peer-to-peer voice calls.
You can make secure calls to all IP phones complying with the ZRTP version
used by the AVIATOR Wireless Handset, see the Installation and
maintenance manual. Standard X.509 certificate has been added for
Stronger Authentication (SA) for closed user groups.

To configure the AVIATOR Wireless Handset for secure calling

Note

There are two Voice numbers, one for Standard Voice and one for
3.1 kHz Audio.

Note

SIP Service Provider details:

In order to make a secure call you

must have a SIP account at a SIP Service Provider. You must make
sure

• that the Service Provider allows for the ZRTP protocol
• if calling from a SwiftBroadband unit, the Service Provider

allows for RTP streaming through the Service Provider’s server.

«
...
47
48
49
50
51
...
»

Содержание AVIATOR 200































































































































Отзывы:

Нет отзывов