background image

5

Chapter 2

2222

G

etting star

ted

Getting started

2

This chapter describes how to install and start up the AVIATOR Wireless 
Handset and make the first call. It also gives an overview of the display and 
keypad and explains how to navigate with the keypad.

Getting started with the AVIATOR Wireless 
Handset

Introduction

The AVIATOR Wireless Handset connects to:

• a wireless access point, which is connected to a SwiftBroadband unit
• a wireless access point, which is connected to another IP connection
• a SwiftBroadband unit with integrated wireless access point

The internal battery is charged from the dedicated cradle connected to an 
external power supply.

AVIATOR Wireless Handset connectors

The handset has two connectors on the side of the handset:

• one connector for connecting a headset (3.5 mm SMT phone jack, 

Switchcraft 35RASMT3BHNTR, see the Installation & Maintenance 
manual for details).

• one Mini-USB 5-pin connector, for charging the handset from a 

computer or USB charger in the service & installation center.

Mini-USB

Jack connector for headset

Содержание AVIATOR 200































































































































Отзывы: