manualshive.com logo in svg

COBHAM 2201R, Справочное руководство, Страница: 30 / 295

Поделиться
Скачать
COBHAM 2201R Скачать руководство пользователя страница 30

2201R Mobile Tester  SCPI Reference Guide

Chapter 2 Remote control of the 2201R Mobile Tester

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

30

The base station and mobile station parameter subsystems

These subsystems allow access to the base station (BS) parameters (i.e. the 2201R simulating a base station) and to 
the information received from the mobile under test like the measurement report. The commands of these 
subsystems are described here.

CONFigure – This subsystem incorporates all changeable BS parameters of all implemented communication systems.

CALL – This subsystem handles call procedures and allows to read out the measurement report generated by the 
mobile under test.
The information available is dependent on the current state of a call, i.e. some commands require an established radio 
communication link between the 2201R and the mobile under test.

The CONFigure subsystem

This subsystem incorporates all changeable BS parameters of all systems implemented. The key commands are the 
following:

The CALL subsystem

This subsystem contains commands

•

for call setup and handling procedures and

•

to read out the measurement report, generated by the mobile.

NOTE

The settings made here directly affect all communication system-specific subsystems.

CONFigure:CSYStem

Selects the communications system to work with.

CONFigure:<SystemOption>:...

These commands select parameters within a communications 
system.

CONFigure:<SystemOption>:BS:... 
or 
CONFigure:<SystemOption>:NB:... 

These are the commands to set specific system parameters 
like the base station's RF output power level or its identity. 

CONFigure:<SystemOption> :MSTAtion:..
or
.CONFigure:<SystemOption> :UE:...

The mobile-specific information is handed over to the 2201R 
using these commands. One example is the power level.

CONFigure:<SystemOption> :BER:...

These commands set the BER parameters. 

CONFigure:<SystemOption> :GROup:...

With the help of these commands, groups of measurements 
may be defined.

CONFigure:COUPloss:...

These commands provide access to the coupling loss 
compensation feature of the 2201R.

Содержание 2201R








































































































































































































































































































Отзывы:

Нет отзывов