manualshive.com logo in svg

COBHAM 2201R, Справочное руководство, Страница: 177 / 295

Поделиться
Скачать
COBHAM 2201R Скачать руководство пользователя страница 177

2201R Mobile Tester  SCPI Reference Guide

Chapter 9 Call commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

177

:CALL:GSM:MSINfo:TADVance

Syntax

:CALL:GSM:MSINfo:TADVance

Parameters

There are no parameters.

Description

This query delivers back the timing advance currently used by the mobile (in bit periods).

Query

There is only a query form of this command available. The query delivers back one integer.

Example

:CALL:GSM:MSINfo:TADVance?
The integer delivered back: "0".

:CALL:GSM:MSINfo:DUALband

Syntax

:CALL:GSM:MSINfo:DUALband

Parameters

There are no parameters.

Description

This query delivers back an integer indicating whether the mobile is able to use both the GSM and PCN frequency 
ranges (GSM 900 and GSM 1800).

Query

There is only a query form of this command available. The query delivers back one integer indicating the supported 
bands:
1 - P-GSM only
2 - E-GSM only
4 - GSM 1800 only
5 - P-GSM and GSM 1800
6 - E-GSM and GSM 1800

Example

:CALL:GSM:MSINfo:DUALband?
The integer delivered back is: "6".

Содержание 2201R








































































































































































































































































































Отзывы:

Нет отзывов