18
5.39.2.3 For instance, send SMS “up123456 jonnes 666666” to the tracker, and if succeeded, the
tracker returns “user, password OK”
Note: 123456 is tracker device password, jonnes is the user name for GPRS login, 666666 is the
password for GPRS login.
5. 39.3 IP and port setup
5.39.3.1 Send SMS as below via a cell phone: apa Space + IP A Space
+ Port Number. If succeeded, “adminip OK” is returned by the device in SMS.
5.39.3.2 e.g, Send SMS command “adminip123456 202.104.150.75 9000” to the tracker device,
If succeeded, “adminip OK” is returned by the device in SMS.( 123456 is default password
，
202.104.150.75 is IP
，
9000 is port).
5.40 Less GPRS traffic
5.40.1 Tracker will change to less GPRS traffic mode after parking 5 minutes, GPRS disconnect
and connect again when alarm being triggered or detect vibration.
5.40.2 Activate this function: Send "less gprs+password on", tracker will reply "less gprs on ok".
5.40.3 Deactivate this function: Send "less gprs+password off", tracker will reply" less gprs off
ok".
Note: 123456 is the password of tracker, and replace it with the new if you have changed.
5.41 Modes switch between “SMS” and “GPRS”
5.41.1 The default mode is “SMS”
5.41.2 Send SMS “GPRS+password” to the unit, and it will reply “GPRS ok!” and switch to
“GPRS” mode.
5.41.3 Send SMS “SMS+password” to the unit, it will reply “SMS ok!” and restore to “SMS”
mode.
5.42 Setup monitor center number
5.42.1 Setup: send command “cepspace+number” to tracker, it will
reply“centernum ok”, for example, send centernum123456 13800138000
5.42.2 Cancel: Send “nocepassword”.
Note: If monitor center number doesn’t setup, auto track messages will be sent to the cell phone
which send this command.
