Cobalt Digital Inc OG-PC-x86-A, Руководство по эксплуатации продукта

Страница: 7 / 26

OG-PC-X86A-OM (V1.0) OG-PC-X86-A PRODUCT MANUAL
1-3
Introduction
Safety and Regulatory Summary
Safety and Regulatory Summary
Warnings
Cautions
OG-PC-x86-A Functional Description
Figure 1-1 shows a functional block diagram of the OG-PC-x86-A. The
OG-PC-x86-A Integral Frame-Installed PC for openGear
®
Frames is a
compact PC which is installed directly in the frame in the form of an
openGear-style card pair assembly with a double-width rear I/O module.
The OG-PC-x86-A obtains its power from the frame midplane with no
external cabling or sources. Using the OG-PC-x86-A, special applications of
the user’s choice can be conveniently collocated directly in the frame.
The OG-PC-x86-A unit installs in the same manner as any other openGear
®
device; the device/card is inserted into desired frame slot pair where it mates
with a rear I/O module. Via a rear I/O module supplied with the device,
OG-PC-x86-A external connections are provide, consisting of dual GigE,
USB 2.0 and 3.0, HDMI, serial, as well as a DisplayPort.
Note: A third, additional GigE port is available as a per-slot GigE connection when
OG-PC-x86-A is used in conjunction with the oGx frame or equivalent per-slot
GigE frame.
Basic Processing Details
The OG-PC-x86-A consists of the following architecture:
•
Intel
®
Pentium
®
N3710
•
1.6 GHz (2.56 GHz burst)
•
4-Core
•
8GB DDR3
! WARNING !
To reduce risk of electric shock do not remove line voltage service barrier cover on frame
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
This device is intended for environmentally controlled use only in appropriate video
terminal equipment operating environments.
CAUTION
This device contains no user-serviceable components except where expressly stated.
Refer servicing to authorized personnel.