Cobalt Digital Inc 9980-CSC-3G, Руководство по эксплуатации продукта, Страница: 49 / 76

9980CSC3G-OM (V1.4) 9980-CSC-3G PRODUCT MANUAL
3-21
Operating Instructions
9980-CSC-3G Function Menu List and Descriptions
Presets
Allows user control settings to be saved in a Preset and
then loaded (recalled) as desired, and provides a
one-button restore of factory default settings.
• Preset Layer Select
• Preset Enter/Save/Delete Locks and unlocks editing of presets to prevent accidental overwrite as
follows:
• Protect (ready): This state awaits Protected and allows preset Save/
Delete button to save or delete current card settings to the selected
preset. Use this setting when writing or editing a preset.
• Protected: Toggle to this setting to lock down all presets from being
inadvertently modified or deleted. Use this setting when all presets
are as intended.
• New/Updated Preset Name: Field for entering user-defined name for
the preset being saved (in this example, “IRD Rcv122”).
• Save: Saves the current card settings under the preset name defined
above.
Table 3-2 9980-CSC-3G Function Menu List — continued
Allows selecting a functional layer (or “area of concern”) that the preset is concerned with. Limiting presets to a layer or area of
concern allows for highly specific presets, and masks changing card settings in areas outside of the layer or area of concern.
Default All setting will “look” at all card settings and save all settings to the defined preset with no masking.
Selecting a layer (in the example, “Video Proc”)
will set the preset to only “look at” and “touch”
video proc/color correction settings and save
these settings under the preset. When the preset
is loaded (recalled), the card will only “touch” the
video proc layer.
Example: Since other setups can be considered
independent of custom video proc settings, if
normal input routing was set up with a particular
video proc setting in effect, and at a later time input routing or other settings need to be changed, selecting Video Proc here tells
the preset save and load to not concern itself with other custom settings and apply only the video proc settings preset. In this
manner, the saved video proc settings can be applied without disturbing any other settings.
Protected state –
changes locked out
Ready (open) state –
changes can be applied