Cobalt Digital Inc 9971-MV -4K Series, Руководство по эксплуатации продукта

Страница: 54 / 62

3
9971-MVx-4K Function Menu List and Descriptions
3-28
9971-MVX PRODUCT MANUAL 9971-MVX-OM (V1.0B PRELIM)
Protocols (TSL Integration) Controls
Provides controls for integrating TSL router IP
communication with 9971-MVx-4K to provide tally
attribute control and TSL display address for the PiP
images.
Note: UI depictions below may show Screen 1 and Screen 2 (Screen 1 and Screen 2) controls.. Screen 2 controls appear
only when licensed with option +DUAL, which allows the card to support two independent screen outputs. If not
optioned with +DUAL, the Screen 2 controls/selections are not ackowledged and therefore can be ignored.
Note: •
Router address must be accessible to network used for 9971-MVx-4K rear module Ethernet port (as set using the card
Network Settings Controls (p. 3-30)).
•
When router access (fetch) is enabled, control of certain burn-in aspects is asserted by router control, with user
manual control locked out.
Tally Setup Controls
Table 3-1 9971-MVx-4K Function Menu List — continued
TSL setup controls.
Sets the card to communicate with TSL
Tally attribute setup controls.
Sets non-tally appearance and choices of color/
opacity when Tally-ON condition occurs.
Tally-to-PiP addressing setup.
Sets addressing for tally for each of the individual
available PiPs.