Cobalt Digital Inc 9926-2HtoS, Руководство по эксплуатации продукта

Страница: 43 / 62

9926-xHtoS-OM (V1.2) 9926-XHTOS PRODUCT MANUAL
3-17
Operating Instructions
9926-xHtoS Function Menu List and Descriptions
GPO Setup Controls
Provides controls for setting up the two GPO’s
power-up states as well as forced manual triggering.
• GPO Static Controls
Power-on State allows the power-up GPO state to be set (initialized)
upon power-up
Presets
Allows user custom control settings to be saved in a
Preset and then loaded (recalled) as desired, and
provides a one-button restore of factory default
settings.
• Preset Save / Select / Load Controls
Table 3-1 9926-xHtoS Function Menu List — continued
• Load Preset button allows loading (recalling) a selected previously
saved preset. When this button is pressed, the changes called out in
the preset are immediately applied.
• Clear Preset button deletes the currently selected preset, rendering
the preset back to Empty default.
• Modify Preset button activates/opens other buttons such as Save
Preset, Clear Preset, and Delete All to allow changes.
• Pressing Save Preset saves current states to user-named preset.
• Restore Factory Defaults button allows loading (recalling) the
factory default preset. When this button is pressed, the changes
called out in the factory default preset are immediately applied.
• Download saves all individual presets to a .bin file to be
downloaded to a connected computer.
• Delete All deletes all saved presets within the current user presets
list.
• Load Autosave on Preset File Upload
When a Download .bin file is created, all defined presets as well as
any current transient (“unwritten”) card settings/state in place are
also saved within the Presets .bin.
- Leaving the box unchecked will, upon subsequent Presets .bin
upload, push the saved presets to the card but will not invoke or
write over any transient settings the card may have in place (no
settings changes occur unless manually enacted).
- Checking the box will, upon subsequent Presets .bin upload, also
invoke any transient settings the card may have had in place during
Presets .bin save/download, as well as pushing the saved presets
to the card.
Preset Layer Select allows selecting a functional layer
(or “area of concern”) that confines the preset to a layer it
is concerned with. Limiting presets to a layer or area of
concern allows for highly specific presets, and masks
changing card settings in areas outside of the layer or
area of concern.
Selecting a layer will set the preset to only “look at” and
“touch” the selected layer(s) settings and save these
settings under the preset. When the preset is invoked (loaded), only the layer(s) selected when the preset was saved are
“touched”.