manualshive.com logo in svg

Cobalt Digital Inc 9902-DC-4K, Руководство по эксплуатации продукта

Поделиться
Скачать
Cobalt Digital Inc 9902-DC-4K Скачать руководство пользователя страница 15

9902DC4K-OM (V1.5)

9902-DC-4K PRODUCT MANUAL

1-11

Introduction

Technical Specifications

9902-DC-4K Rear I/O Modules

The 9902-DC-4K physically interfaces to system video connections at the 
rear of its frame using a Rear I/O Module. All inputs and outputs shown in the 
9902-DC-4K Functional Block Diagram (Figure 1-1) enter and exit the card 
via the card edge backplane connector. The Rear I/O Module breaks out the 
9902-DC-4K card edge connections to BNC and other connectors that 
interface with other components and systems in the signal chain.

The full assortment of 9902-DC-4K Rear I/O Modules is shown and 
described in 9902-DC-4K Rear I/O Modules (p. 2-4) in Chapter 2, 
“Installation and Setup”.

Technical Specifications

Table 1-1 lists the technical specifications for the 9902-DC-4K Up/Down/
Cross Format Converter, Video/Audio In with Frame Sync card.

Table 1-1

Technical Specifications

Item

Characteristic

Part number, nomenclature

9902-DC-4K Quad-Input 3G/HD UHD Broadcast Downconverter 
with Optional Frame Sync 

Installation/usage environment

Intended for installation and usage in frame meeting openGear™ 
modular system definition

Power consumption

< 18 Watts maximum

Installation Density

Up to 20 cards per 20-slot frame

Environmental:

Operating temperature:
Relative humidity (operating or storage):

32° – 104° F (0° – 40° C)
< 95%, non-condensing

Frame communication

10/100/1000 Mbps Ethernet with Auto-MDIX

Indicators

Card edge display and indicators as follows:

• 4-character alphanumeric display

• Status/Error LED indicator

• Input Format LED indicator

Program (Quadrant) Video Inputs

Four 3G/HD-SDI video inputs

Data Rates Supported:

SMPTE 424M, 292M

Impedance:

75 

Ω

 terminating

Receive Cable Length: 3G/HD-SDI: 120/180 m (Belden 1694A)

Return Loss (SDI):

> 15 dB up to 1.485 GHz

> 10 dB up to 2.970 GHz

Содержание 9902-DC-4K































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды