SD301 Access Appliance
User’s Guide 13
Make sure are all connections are secure; if necessary, use
a wrench or pliers to lightly tighten the connections.
5 Connect PC Cable
a)
Locate the Ethernet PC cable included with the Access Appliance
and connect it to the Access Appliance’s
Ethernet
port.
b)
Connect the loose end of that cable into an active Ethernet port
on your PC. If your PC does not have a Network Interface Card,
one must be installed before you can use the Access Appliance.
Many computer retail stores and service centers can perform this
task, if you require assistance.
PC Ethernet Port
Do not attempt to insert the supplied Ethernet cable
into a dial-up modem.
Doing so could damage your
modem port and/or the Ethernet cable.
6 Connect the Power Adapter to the Appliance
Locate the included power adapter and connect the appropriate end
to the
PWR
port on the Access Appliance.
7 Apply Power to the Access Appliance
Before plugging the adapter into the power outlet, consult these
important notes:
Please check the voltage requirements printed on
the power adapter before plugging it into an AC
power outlet.
If the power adapter’s input voltage
specification does not match what is being provided at
your AC outlet, contact your service provider or coaXmedia
for a replacement.