Coast Spas Classic Series, Руководство пользователя

Страница: 20 / 32

20
Elite Topside Quick Reference Card
201912131148
to “Ready” or “Rest”. Press and release the “Menu” button to save
the selected Mode.
Ready-in-Rest
Mode appears in the display if the spa is in Rest Mode and “Jets”
is pressed. It is assumed that the spa is being used and will heat
to set temperature. The primary pump will run until set tempera-
ture is reached, or 1 hour has passed. After 1 hour, the System
will revert to Rest Mode. This mode can also be reset by entering
the Mode Menu and changing the Mode.
Show and Set Time-of-Day
Be sure to set the Time-of-Day Setting the time-of-day can be
important for determining filtration times and other background
features. When in the TIME menu, SET TIME will flash on the
display if no time-of-day is set in the memory.
Setting the Time:
Press and release the “Menu” button until “TIME” appears. Press
and release the “Up” or “Down” to adjust the Hour. Press the
“Menu” button to save the hour and move on to the Minutes.
Press and release the “Up” or “Down” to adjust the Minutes. Press
the “Menu” button to save the Minutes.
Note: If Time of Day is not actually programmed due to a
power cycle, SET TIME will appear in the menu instead of just
TIME.
Hold (Standby)
Hold Mode is used to disable the pumps during service functions
like cleaning or replacing the filter. Hold Mode will last for 1 hour
unless the mode is exited manually.
Selecting Hold Mode:
Press and release the “Menu” button until “HOLD” is on the
screen. Press and release the “Up” or “Down” button to activate
“Hold Mode”. The screen will display HOLD, ING, FOR, and the
time remaining.
Flip (Invert Display): Invert the display.
Changing the Screen Orientation:
Press and release the “Menu” button until “FLIP” is on the screen.
Press and release the “Up” or “Down” button to invert the display.
Press and release the menu button to save this setting.
Restricting Operation
The control can be restricted to prevent unwanted use or tempera-
ture adjustments. Locking the panel prevents the controller from
being used, but all automatic functions are still active. Locking the
Temperature allows Jets and other features to be used, but the
Set Temperature and other programmed settings cannot be ad-
justed.
Temperature Lock allows access to a reduced selection of menu
items. These include Set Temperature, FLIP, UTIL, INFO and
FALT LOG.
Restricting Operation:
Press and release the “Menu” button until “LOCK” is on the
screen. Press and release the “Up” or “Down” button to enter the
menu. Press and release the “Menu” button to switch from
“TEMP” to “PANL”. Note: Pressing and releasing the “Menu”
button again will take you back to the beginning of the “LOCK”
menu. With “TEMP” or “PANL” selected press and release the
“Up” or “Down” button to change the menu selection to the
“OFF”/”ON” option. Press and release the “Up” or “Down” button
to change the menu option from “OFF” to “ON” to lock either the
“TEMP” to “PANL”. Press and release the “Menu” button to save
the “LOCK” setting.
Unlocking
This Unlock sequence may be used from any screen that may be
displayed on a restricted panel.
Unlocking instructions:
While pressing and holding the Temperature Button (UP button
or Up button), slowly press and release the “Menu” button two
times.
Adjusting Filtration
Filter cycles are set using a start time and a duration. Start time
is indicated by an “A” or “P” in the bottom right corner of the dis-
play. Duration has no “A” or “P” indication. Each setting can be
adjusted in 15-minute increments. The panel calculates the end
time and displays it automatically.
How to adjust the Filtration:
Press and release the “Menu” button until “FLTR” 1 or 2 appear
on the screen. Press and release the “Up” or “Down” button to
enter the menu, “BEGN” should appear. Press and release the
“Up” or “Down” button to set the start time (Option 1) or Press
and release the “Menu” button to set the duration (Option 2).
Pressing and releasing the “Menu” Button again during the
“RUN”-”HRS” will display which filter cycle is being set and the
end time. Press and release the “Menu” once more to save the
settings.
Option 1: Setting the Start Time
With “BEGN on the screen press and release the “Up” or “Down”
button, use the “Up” or “Down” buttons to adjust the starting
hour. When satisfied press the “Menu” to proceed to the Minutes.
Use the “Up” or “Down” buttons to adjust the starting Minutes.
When complete press the “Menu” button to save the starting
time.
Option 2: Setting the Duration
With “BEGN on the screen press and release the “Up” or “Down”
button to set the starting time (Option 1, please see above) or
press the “Menu” button to proceed to “RUN”-”HRS”. Use the
“Up” or “Down” buttons to adjust the hours of duration. Press the
“Menu” button to start the minutes. Use the “Up” or “Down” but-
tons to adjust the duration minutes. When complete press the
“Menu” button to save the duration time.