18
The new setting has been saved; press any key to return to
normal operation.
4.2.3 SET DEFAULT ROUTE AND SEGMENT
Pressing PLAY will allow modification of this option. Pressing
another key will skip to the next option.
This option changes the default Route and Segment that loads at power up in manual mode. For this option to
be enabled, the option “
4.2.2 Modify Initial Route and
” must be set to “DEFAULT”.
To modify this option:
1.
Before
entering the OPTION menu, use the panel to scroll to the required route and segment that you
want to become the new defaults at power-up;
2.
Enter the option menu and scroll (up) using the SEGMENT key to the
“SET DEFAULT R/S
?
”
option and
press PLAY to enter the option;
3.
Press PLAY again. The following message will appear:
Press PLAY to accept the change. Other keys will reject the
change and quit the option menu.
The setting has been saved; press any key to return to normal
operation.
4.2.4 SET GPS ON OR OFF
Pressing PLAY will allow modification of this option. Pressing
another key will skip to the next option.
This option turns the GPS autonomous mode on or off. Some installations do not require the GPS functionality
(in stationary installations for example) and therefore to prevent GPS status messages from flashing on the
panel, it is wise to turn the GPS function off completely.
The options are:
•
ON
: This enables the GPS autonomous mode.
•
OFF
: This disables the GPS autonomous mode. The user must play all commentaries manually.
To modify this option:
Use SEGMENT UP to choose the required setting. Once the
setting has been made, press the PLAY key to save.
The setting has been saved; press any key to return to normal
operation.
SET DEFAULT R/S?
PLAY=Y, OTHERS=N
OPTIONS UPDATED.
PRESS ANY KEY...
ARE YOU SURE?
PLAY=Y, OTHERS=N
OPTIONS UPDATED.
PRESS ANY KEY...
GPS STATUS: ON
SEGMENT UP, PLAY
OPTIONS UPDATED.
PRESS ANY KEY...
SET GPS ON/OFF?
PLAY=Y, OTHERS=N