GREAT BRITAIN
•
CUSTOMER SERVICE
tel
020 8247 9300
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
F
G
H
I
J
K
A
B
C
D
L
E
M
Ver
. 20200825
RGB Flexible LED Light Strip
Art.no 36-7237
Model SP-LS3M30LRGB-01B
Please read the entire instruction manual before use and then save it for future
reference. We reserve the right for any errors in text or images and any necessary
changes made to technical data. In the event of technical problems or other queries,
please contact our Customer.
Safety
Warning
• Neither the product nor its mains adapter may be dismantled or modified in any way.
• Never use the product if it, the mains lead or the mains adapter is in any way
damaged or malfunctioning. Unplug it immediately in case of injury.
• Do not use the product in explosive atmospheres or in the presence of flammable
liquids or gases.
• The product must only be connected to the included mains adapter.
• Never connect several or other types of devices to the mains adapter.
• The mains lead must never be replaced. The product must be discarded if it is
damaged in any way.
• The product must not be installed on a wet or electrically conductive surface.
• Make sure that the cables are not damaged whilst the product is being installed.
• The mains lead must not be crushed or damaged, protect it from sharp edges,
oil and heat.
• Always unplug the product from the wall outlet when it is not in use.
• Do not carry the product using the mains lead and do not use it for other
incompatible purposes.
• The mains lead must not be shortened or cut.
Important
• The bulbs cannot be replaced. When the LED strip has reached the end of its
service life, the entire product must be discarded.
• This product is designed exclusively for private use.
Product description
Remote control
A) [
] Increase brightness or
Quicker light effect
B) [
] Decrease brightness or
Slower light effect
C) [ OFF ]
D) [ ON ]
E) [ B ] Blue light
F) [ W ] White light
G) [ FLASH ] Light effect
H) [ STROBE ] Light effect
I) [ FADE ] Light effect
J) [ SMOOTH ] Light effect
K) Colour nuances
L) [ R ] Red light
M) [ G ] Green light
Risk for eye damage.
Do not look directly at the lights/LEDs.
The product is not suitable for household illumination.
This product is intended for indoor use only.
Class II mains adapter.
Class III string light.
Assembly
Information
The LED strip can be mounted using double-sided adhesive tape. For best adhesion,
ensure that the surface is clean, dry and free of grease.
1. If necessary, the length of the LED
strip can be adjusted by cutting it at
one of the markings (every 10 cm
along the length of the strip).
2. Remove the protective film from
the tape on the back of the light
strip and attach it to the desired
location.
3. Attach the LED control to the light
strip.
4. Connect the mains adapter to the LED control unit.
5. Plug the mains adapter into a wall socket.
Instructions for use
Information
. The light strip will always turn on with the last used setting.
1. Press [ ON ] (D) to turn the light strip on.
2. Press [
] (A) Increase brightness or Quicker light effect.
3. Press [
] (B) Decrease brightness or Slower light effect.
4. Press any of the buttons to select the colour of the light.
5. [ R ] (L) = red.
6. [ G ] (M) = green.
7. [ B ] (E) = blue.
8. [ W ] (F) = white.
9. (K) = 12 nuances within the RGB spectrum.
10. Press any of the buttons to select the light effect.
11. [ FLASH ] (G): 3 colours that change without merging.
12. [ STROBE ] (H): 6 colours that merge into one another.
13. [ FADE ] (I): 8 colours that merge into one another..
14. [ SMOOTH ] (J): 7 colours that change without merging.
15. Press [ OFF ] (C) to turn off the light strip.
Care and maintenance
• Unplug the mains lead from the wall socket before cleaning.
• The product should be cleaned using a dry cloth or vacuum cleaner, when necessary.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling the product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Note:
Make sure there are
no obstacles between the LED
control unit’s IR receiver and
the remote control.
Mains adapter
Input
100-240 V AC, 50/60 Hz
Power
18 W
Output
12 V DC
Light strip
Size
3000 × 10 mm
Bulb
90 × LED
Rated voltage
12 V DC
Rated power
18 W
Operating
temperature
−20 +45 °C
LED control unit
Rated voltage
12 V DC
Remote control
Range
Max. 5 m
Battery
1 × CR2025 (included)
