GREAT BRITAIN • CUSTOMER SERVICE
contact number: 0845 300 9799
e-mail: [email protected] internet: www.clasohlson.com/uk
EN
GL
IS
H
Ver
. 20140326
20 W Work Light
Art.no 18-2886 Model JF8100-20W-UK
36-5587
JF8100-20W
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our Customer Services.
Safety
• Read these instructions carefully before using the product.
• Never let children use the product without adult supervision. Never look directly into the light; it could damage
your eyesight.
• Always unplug the light when it is not in use. Pull the plug, not the lead.
• Protect the work light from dust, water and extreme temperatures. High temperatures can damage the bulb.
• Before use, check that the plug, lead, diffuser and casing are all undamaged. If any damage is detected, do not
use the light until it has been repaired by a qualified technician.
• Never cover the work light.
• Never use the work light in the vicinity of explosive gases or liquids.
• The LEDs cannot be replaced.
• This light must not be dismantled or modified in any way.
• The light must only be used on the supplied stand, it must never be mounted on a wall or ceiling.
• Treat the light carefully and do not subject it to knocks and blows.
• The light must only be connected to an earthed electrical socket.
• Before using the light, make sure that the supply voltage corresponds to the light’s rated voltage.
Operating instructions
1. Place the stand on a firm surface where it cannot tip over.
2. Adjust the tilt angle as necessary.
3. Plug the light into a wall socket.
Care and maintenance
• Never use strong cleaning agents/solvents to clean the product. Clean the light using a soft cloth.
• Always unplug the light before cleaning it.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Voltage
220–240 V AC, 50 Hz
Bulb
1 × 20 W LED
Lead
1.8 m rubber-clad cable H05RN-F 3 × 0.75 mm²
IP rating
IP54
Class
1
